|APN||Access Point Name; a connection gateway for sharing information between a mobile network and a computer network.
See also SSID
|Baud Rate||The frequency that a single bit is transmitted.|
|Bit Map||A mapping from some domain (for example, a range of integers) to bits, that is, values which are zero or one.|
|CAN||Controller Area Networking|
|CAN Message Specification||The CAN message specification details all the
messages that are on the CAN bus. If connected to an
engine, users should reference the J1939 specs.
For a custom protocol, users need to configure the
message specification based on the CAN protocol that
they are getting the file off of.
|CANect®||HED® Telematics Suite Software|
|Debounce Period||The period to wait to let a signal stabilize to a state
(either high or low).
|Enumeration||A number list and the text that represents each number
in the list.
|FMI||Fault Mode Indicator|
|FTP||File Transfer Protocol|
|Hysteresis||How much a value has to change before it is considered
a change by the software algorithm
|J1939||One of several standard CAN protocols|
|Local Website||A user created website OR CANect® View|
|Module||Will need a definition|
|Portal||Software in the HED CANect® suite|
|Programming Gateway||All Linux-based software modules. This includes
CANect® Modules and Displays.
|Reflector||Software in the HED CANect® suite|
|SFTP||Secure File Transfer Protocol, see also FTP|
|SPN||Suspect Parameter Number|
|SSID||Service Set Identifier; the name of a wireless router|
|Tele-cache||The process of storing parameters to flash when
CANect® Portal connectivity is lost, and transferring
parameters by telematics when connectivity is restored.
|VPCA||Vehicle Parameter Control Application
An application that resides on all the Package Enabled
Modules, and provides CAN bus network parsing, which
converts raw vehicle CAN bus traffic into human